Motorcycle Accessories General LCD Digital Tachometer Refitting

Product Information:

Product material: aluminum alloy
Applicable models: all mechanical speed models
Product color: black shell
Product size: 5.5*6.5*7.5cm
Product functions: 1. Speedometer, with a maximum display of 199. Can be set to KM/H and MPH
2. Tachometer, maximum display 10000 RPM
3. Oil gauge, with two lines (8-98 ↓) and three lines (33-565 ↓)
4. Odometer, including cumulative TRIP ODO and zero-return TRIP, defaults to ODO display
Wiring mode: black - positive wire, green - negative wire, black - red - speed signal wire, blue - white - fuel quantity signal
Press and hold the black button on the back for 3 seconds to change the light
Connection method  :
1. Backlight, 7 colors in total, can be switched freely: press and hold the key for 3 seconds to switch the backlight color when the odometer is ODO
2. Switch between KM/H and MPH: press and hold the key and do not release the switch. The screen displays P0000. At this time, bit 0 flashes, press and hold to jump to 10 bit 0, short and safe 10 bit displays 1, press and hold to jump to 100 bit flashes, press and hold to jump to 100 bit displays 6.
Press and hold the thousand-bit flash again, and press and hold the thousand-bit display 6 for six times. At this time, the screen displays 00466, which means 46.6HZ to jump 60KM/H. Press and hold short (this point does not need to be set). At this time, the screen displays 10011001, which means KM/H. If you want to switch to MPH, long press and hold the thousand-bit flash, and long press and hold to switch to 1002, which means it is adjusted to MPH. Press and hold to switch to the next item
3: Speed cylinder number setting After that, press the screen to display 2002, which means it is 2 cylinders (166HZ corresponds to 10*1000RPM/MIN). Short press and long press to jump one position flash, and then long press and long press to switch to 4, which means it has been switched to 4 cylinders (333HZ corresponds to 10*1000RPM/MIN).
4: Oil gauge setting. Connect to the above, short press the screen to display 3002, which means it is a 2-wire oil meter at this time, press all the settings to save and exit, press the single digit to flash, and press the table 3003, which means it has been switched to a 3-wire oil meter, press the short button to save and exit

Packing list:

Oil*1